Overview
IES7211-8PGE2GF-BOS, 8 Ports Booster PoE Switch,with 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
Physical Port
Power over Ethernet
Switching
Hardware
Lightning Protection
Mechanical Properties
|
Layer 2 Features
Security
Management
|
Features
Built-in Power Booster
The built-in power booster converts a DC input of 12V-24V to 48V, which is crucial for deploying standard PoE devices like IP cameras and wireless APs on vehicles like buses, trains, and ships where only lower DC voltages are available. This feature is ideal for public transportation systems and mobile applications.
PoE Power Delivery
The IES7511-8PGE2GF-BOS delivers up to 100W of PoE power, with each port capable of providing 15.4W. It efficiently powers devices such as IP cameras, PoE-enabled wireless routers, and other connected devices, helping to reduce the need for additional power cables, streamlining installation.
Wide Operating Temperature
Engineered to operate under extreme conditions, this 8 Port booster PoE switch works reliably within a temperature range of -25°C to 60°C. This makes it suitable for both indoor and outdoor use in environments like railways, traffic systems, and smart city applications, where temperature fluctuations are common.
IP40-rated Aluminum Alloy Enclosure
Housed in a robust aluminum alloy enclosure with an IP40 rating, the switch is protected against dust, debris, and vibration. This industrial-grade design ensures the switch remains functional even in harsh environments, such as sea and transportation systems.
Advanced Networking Features
It supports advanced Layer 2 networking features like VLAN for segmenting traffic, QoS for prioritizing critical data, and IGMP Snooping for multicast traffic management. These features are ideal for optimizing network performance in complex industrial and transportation networks.
Redundant Power Inputs
With dual power inputs, this 8 port booster PoE switch offers redundancy, ensuring uninterrupted operation even if one power source fails. This feature is critical for mission-critical applications, such as surveillance, where downtime can result in compromised security.
DIN Rail Mounting for Vibration Resistance
Designed with DIN rail mounting, the booster PoE switch resists damage from vibrations caused by vehicle movement. This feature makes it ideal for mobile or vehicular installations, ensuring the switch can handle continuous physical stress without compromising performance.
Connectivity Solutions
8 Port Booster PoE Switch for Bus
8 Port Booster PoE Switch for Rail Transit
Specification
المواصفات الفنية :
IE7511-8GE2GF-BOS10M / 100M / 1G RJ45 المنافذ النحاسية :
81.25G SFP (الألياف) الموانئ :
2منافذ PoE / PoE + :
8نوع امدادات الطاقة :
DC 12V-24Vمنفذ وحدة التحكم (للتكوين) :
Yesالزر "إعادة ضبط" :
Yesالطاقة عبر الإيثرنت :
*بو القياسية :
IEEE 802.3at Power over Ethernet Plus/PSE; Backward compatible with IEEE 802.3af Power over Ethernetنوع امدادات الطاقة بو :
End-span: 1/2 (+), 3/6 (-)بو انتاج الطاقة :
Per port 48V DC, 320mA. max. 15.4 watts (IEEE 802.3af); Per port 48V DC, 630mA. max. 30 watts (IEEE 802.3at)مواصفات الأداء :
*ذاكرة التخزين المؤقت للحزم :
1.6 Mbأوضاع إعادة التوجيه :
Store-and-forwardعرض النطاق الترددي :
24 Gbpsمعدل إعادة توجيه الحزمة :
14.88Mpps (64 byte packet size)حجم قاعدة بيانات عنوان MAC :
8K (48-bit MAC ad-dresses)دعم الإطار الجامبو :
9Kخدمات L2 - شبكات VLAN :
*وضع علامات على الشبكة المحلية الظاهرية (VLAN) وفقا لمعيار IEEE 802.1Q :
Yesوضع علامات QinQ VLAN :
Yesشبكات VLAN القائمة على بروتوكول الإنترنت :
Yesشبكات VLAN المستندة إلى MAC :
Yesشبكة محلية ظاهرية (VLAN) قائمة على البروتوكول :
Yesشبكة محلية ظاهرية صوتية :
Yesتعيين الشبكة المحلية الظاهرية (VLAN) :
Yesخدمات L2 - التوافر :
*السيطرة على العاصفة :
Yes (Broadcast, multicast, unknown unicast)المعيار IEEE 802.3ad - لوائح التأخر (LACP) :
Yesالمعيار IEEE 802.3x :
Yesحلقة (ERPS ، يتوافق مع G.8032) :
Yes, Recovery time < 50msIEEE 802.1D بروتوكول شجرة الامتداد :
YesIEEE 802.1w بروتوكول شجرة الامتداد السريع :
YesIEEE 802.1s بروتوكول شجرة الامتداد المتعددة :
Yesالطبقة 2 مرحل DHCP :
Yesخدمات L2 - تصفية البث المتعدد :
Yesتطفل IGMP (الإصدارات 1 والإصدار 2 والإصدار 3) :
Yesدعم التطفل MLD (v1 و v2) :
YesIGMP التطفل الاستعلام (v2) :
YesMLD التطفل الاستعلام (v1) :
Yesتسجيل شبكة محلية ظاهرية متعددة البث (MVR) :
Yesخدمات L3 - التوجيه :
*توجيه IPv4 الثابت :
100توجيه IPv6 الثابت :
100تجميع الارتباطات :
*دليل LAG :
Yes# من LAGs / # من الأعضاء في كل LAG :
8 LAGs with max 8 members in each LAGخدمات مراقبة واكتشاف الشبكة :
*802.1ab LLDP :
Yesسنمب :
v1, v2c, v3مجموعة RMON 1،2،3،9 :
Yesأمن الشبكات :
Yesالمعيار IEEE 802.1x :
Yesمحاسبة نصف قطرها :
Yesقوائم التحكم في الوصول (ACL) :
Yesقوائم التحكم في الوصول المستندة إلى بروتوكول الإنترنت (IPv4 وIPv6) :
L2 / L3 / L4قوائم التحكم في الوصول المستندة إلى MAC :
Yesقوائم التحكم في الوصول المستندة إلى TCP/UDP :
Yesالتحكم في إدخالات MAC # الثابتة :
48الأمان المستند إلى المنفذ بواسطة عناوين MAC المقفلة :
Yesفحص ARP الديناميكي :
Yesحماية DoS :
Yesمنع هجمات DoS :
Yesحماية من عاصفة الشبكة ، DoS :
Yesجودة الخدمة (QoS) :
*تحديد المعدل المستند إلى المنفذ :
Yes ingress and egressجودة الخدمة القائمة على المنفذ :
Yesدعم حقول IPv6 :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
Yesوجهة MAC و IP :
YesIPv4 و v6 DSCP :
Yesالمستندة إلى TCP/UDP :
Yesجولة روبن المرجحة (WRR) :
Yesتقنية قائمة انتظار الأولوية الصارمة :
Yesبروتوكولات شبكة IEEE :
*البروتوكولات :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXالبروتوكولات 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning Tالإدارة والمراقبة واستكشاف الأخطاء وإصلاحها :
*إدارة كلمات المرور :
Yesالتحكم في الوصول عبر RADIUS و TACACS + :
Yesإدارة IPv6 :
YesSNMP v1 / v2c / v3 :
Yesانعكاس المنفذ :
Yes ingress and egressانعكاس متعدد المنافذ إلى واحد :
6أداة اختبار الكابلات :
Yesالوصول المستند إلى الويب TLS/HTTPS (الإصدار) :
Yes (v1.2)نقل الملفات (التحميلات والتنزيلات) :
TFTP / HTTPتحميل / تنزيل HTTP (البرنامج الثابت) :
Yesسجل النظام (RFC 3164) :
Yesالمصابيح :
Yesلكل منفذ :
Speed, Link, Activity; PoE in different modeلكل جهاز :
Powerالمواصفات المادية :
*الأبعاد (العرض * العمق * الارتفاع) :
150 x 130 x 48 mm (5.91 x 5.12 x 1.89 in)ثقل :
0.9 kg (1.98 lb)حماية شل :
P40 high-strength aluminum caseمتطلبات الطاقة :
DC 12~24V, redundant power with reverse polarity protectionاستهلاك الطاقة :
100W (when all ports used, line-rate traffic and max PoE)أقصى قوة :
10W (worst case, all ports used, line-rate traffic) (Watts)استهلاك الطاقة في وضع الخمول :
7W (all ports link-down standby) (Watts)إيثرنت موفر للطاقة (EEE) :
Yes (deactivated by default)المواصفات البيئية :
*درجة حرارة التشغيل :
-40° to 85°C (-40° to 185°F)رطوبة التشغيل :
95% maximum relative humidity (RH), non-condensingارتفاع التشغيل :
10,000 ft (3,000 m) maximumدرجة حرارة التخزين :
-40° to 85°C (-40° to 185°F)رطوبة التخزين (نسبي) :
95% maximum relative humidity, non-condensingارتفاع التخزين :
10,000 ft (3,000 m) maximumالمعيار التنفيذي والحماية :
*الحماية من الصواعق :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC الجزء 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (مجال مغناطيسي نابض) :
1000A/mIEC61000-4-10 (تذبذب مخمد) :
30A/m, 1MHzIEC61000-4-12 / 18 (موجة الصدمة) :
CM 2.5kV, DM 1kVIEC61000-4-4 (EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (إرسال الوضع المشترك) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (إرسال التردد اللاسلكي) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (زيادة): كابل الطاقة :
CM±4kV/ DM±2kV, Data cable: ±4kVالخواص الميكانيكية :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti Shockالانبعاثات الكهرومغناطيسية والمناعة :
*الشهادات :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013أمان :
*شهادات السلامة :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)الضمان والدعم :
*الضمان المحدود للأجهزة :
Limited Lifetime*الدعم الفني عبر الهاتف والبريد الإلكتروني* :
Limited Lifetime*24x7 الدردشة عبر الإنترنت الدعم الفني :
Limited Lifetime*محتويات العبوة :
*جميع الموديلات :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideنوع العمل :
Industrialباندريدث :
1Gالمزيد من الفلاتر :
L2+ Managed
Questions & Answers
1. What is the total power budget of this switch?
The switch provides a total power budget of 100W, delivering up to 30W per PoE port.
2. Does the switch support Gigabit Ethernet speeds?
Yes, the switch supports 10/100/1000 Mbps speeds on all 8 ports.
3. What input power does this switch require?
It requires DC input between 12V and 24V, with a built-in booster to supply 48V for PoE devices.
4. Can it power high-demand PoE devices?
Yes, it supports IEEE 802.3af/at standards, delivering up to 30W per port for devices like IP cameras and wireless access points.
5. What advanced network features does this switch include?
It includes features like QoS for traffic prioritization, VLAN for network segmentation, and IGMP Snooping for multicast traffic optimization.
6. What kind of network redundancy features does it support?
It supports ERPS, STP, RSTP, and MSTP protocols for ensuring network reliability and preventing loops.
7. Is it suitable for harsh industrial environments?
Yes, with an IP40-rated enclosure and an operating temperature range of -40°C to 85°C, it is built for rugged conditions.
8. Does this switch support dual power inputs?
Yes, it has dual power inputs for added reliability and stability in case of power failure.
9. Is the switch easy to install in industrial applications?
Yes, it supports DIN-rail mounting, which ensures secure and convenient installation in vehicles and other industrial environments.
Downloads
Related Products