Overview
IES7511-8GE4TF-DC, 8 Port Gigabit Industrial Managed Ethernet Switch with 4-10Gb SFP+ Uplink,DIN-Rail mount,Support ERPS
-
Physical Port
8-10/100/1000BASE-TX Fast Ethernet RJ45 ports4-1G/2.5G/10GBASE-X mini-GBIC/SFP+ slot1-RJ45 console interface for switch management and setup1-Reset button for system factory default and reboot1-USB interface for switch setupSwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 71.42Mpps,MAC address 16kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~56V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power,and LINK/ACTMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti Shock -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authenticationLayer 3 FeaturesSupport Static routingSupport RIPSupport OSPFSupport VRRP -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupport QinQ VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports UDLDSupports Quality of Service (Qos)Supports Static routingSupports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Layer 2 and Layer 3 Managed Capabilities
The IES7511-8GE4TF-DC offers robust Layer 2 and Layer 3 management features, providing flexible control over network configurations. Layer 2 capabilities like VLAN, Spanning Tree Protocol (STP), and Link Aggregation (LAG) help optimize network traffic and improve security, ensuring that data is routed efficiently within local networks. Layer 3 static routing enables inter-network communication, supporting more complex topologies and boosting performance for mission-critical applications. These features empower users to design scalable, secure, and high-performance networks tailored to industrial environments.
4 10Gb SFP+ Uplink Ports
Equipped with 4 10Gb SFP+ uplink ports, the IES7511-8GE4TF-DC provides high-bandwidth connections for backbone networks, ensuring ultra-fast data transmission and minimal latency. The 10Gb SFP+ ports are ideal for linking the switch to other high-performance devices, servers, or network infrastructure, supporting large data flows in demanding environments. Whether used for industrial automation, smart factories, or large-scale security systems, the 10Gb uplinks help ensure smooth, efficient communication across the network, even during high-traffic periods.
ERPS Ring Network for Redundancy and Fast Recovery
The IES7511-8GE4TF-DC supports Ethernet Ring Protection Switching (ERPS), which provides network redundancy and fast recovery times in the event of link failures. The ERPS functionality ensures a recovery time of less than 50 milliseconds, minimizing downtime in industrial networks where continuous uptime is critical. This is particularly important for applications like automation, security surveillance, or any system reliant on a consistent and stable network. ERPS ring topology ensures that your network remains resilient and fault-tolerant, even in the face of unexpected failures.
Rugged IP40-Rated Enclosure
Built to endure the harsh conditions of industrial environments, the IES7511-8GE4TF-DC features a rugged IP40-rated enclosure that provides protection against dust and debris. This feature is vital for installations in factories, outdoor areas, or warehouses, where exposure to particles and contaminants is common. The sturdy design ensures that the switch remains operational and maintains high performance, even when subjected to challenging conditions. This protection enhances the switch’s longevity, making it a reliable choice for industrial and outdoor network installations.
Wide Operating Temperature Range (-40°C to 85°C)
The IES7511-8GE4TF-DC is designed to operate in extreme temperature conditions, with a wide operating temperature range of -40°C to 85°C. This makes it suitable for use in outdoor or unheated indoor environments where traditional switches might fail due to temperature extremes. Whether deployed in remote locations, harsh manufacturing environments, or outdoor installations, this temperature resilience ensures that the switch performs reliably without risk of overheating or failure, offering peace of mind to users in industries like transportation, energy, and automation.
8KV ESD Protection for Enhanced Stability
The IES7511-8GE4TF-DC includes 8KV Electrostatic Discharge (ESD) protection, safeguarding the switch from potential damage caused by electrostatic discharges. In industrial settings, where static buildup and electrical surges are common, this protection is crucial to maintain the integrity and reliability of network performance. The 8KV ESD protection ensures that the switch operates smoothly, preventing network disruptions or hardware failure that can be caused by electrical interference. This feature is essential in sensitive environments such as factories, power plants, and transportation systems.
Dual Power Inputs for Redundancy
The IES7511-8GE4TF-DC supports dual power inputs (AC 12-54V), providing essential power redundancy to ensure continuous operation even in the event of a power failure. This dual power configuration minimizes the risk of downtime and ensures that the switch remains operational in mission-critical environments. This redundancy is particularly important for industries like automation, control systems, and surveillance, where network reliability is essential. By offering dual power inputs, the IES7511-8GE4TF-DC provides an additional layer of security against power disruptions, ensuring uninterrupted network performance.
Connectivity Solutions
8 port Gigabit Industrial Managed Switch with 4-10G SFP+ Uplink connection Solution
8 port Gigabit Industrial Managed Switch with 4-10G SFP+ Uplink Ring Network Connection Solution
Specification
المواصفات الفنية :
IE7511-8GE4TF-DC10M / 100M / 1G RJ45 المنافذ النحاسية :
8منافذ 1G / 2.5G / 10G SFP + (ألياف) :
4منفذ وحدة التحكم (للتكوين) :
Yesمنفذ يو اس بي :
Yes (for firmware and config upload/ download)الزر "إعادة ضبط" :
Yesمواصفات الأداء :
*ذاكرة التخزين المؤقت للحزم :
12 Mbأوضاع إعادة التوجيه :
Store-and-forwardعرض النطاق الترددي :
128 Gbpsمعدل إعادة توجيه الحزمة :
71.42Mppsحجم قاعدة بيانات عنوان MAC :
16Kدعم الإطار الجامبو :
12Kخدمات L2 - شبكات VLAN :
*وضع علامات على الشبكة المحلية الظاهرية (VLAN) وفقا لمعيار IEEE 802.1Q :
Yesوضع علامات QinQ VLAN :
Yesشبكات VLAN القائمة على بروتوكول الإنترنت :
Yesشبكات VLAN المستندة إلى MAC :
Yesشبكة محلية ظاهرية (VLAN) قائمة على البروتوكول :
Yesشبكة محلية ظاهرية صوتية :
Yesتعيين الشبكة المحلية الظاهرية (VLAN) :
Yesخدمات L2 - التوافر :
*السيطرة على العاصفة :
Yes (Broadcast, multicast, unknown unicast)المعيار IEEE 802.3ad - لوائح التأخر (LACP) :
Yesالمعيار IEEE 802.3x :
Yesحلقة (ERPS ، يتوافق مع G.8032) :
Yes, Recovery time < 50msIEEE 802.1D بروتوكول شجرة الامتداد :
YesIEEE 802.1w بروتوكول شجرة الامتداد السريع :
YesIEEE 802.1s بروتوكول شجرة الامتداد المتعددة :
Yesالطبقة 2 مرحل DHCP :
Yesخدمات L2 - تصفية البث المتعدد :
Yesتطفل IGMP (الإصدارات 1 والإصدار 2 والإصدار 3) :
Yesدعم التطفل MLD (v1 و v2) :
YesIGMP التطفل الاستعلام (v2) :
YesMLD التطفل الاستعلام (v1) :
Yesتسجيل شبكة محلية ظاهرية متعددة البث (MVR) :
Yesخدمات L3 - DHCP :
*عميل DHCP :
Yesتطفل DHCP :
Yesخادم DHCP :
Yesخدمات L3 - التوجيه :
*توجيه IPv4 الثابت :
100توجيه IPv6 الثابت :
100توجيه الشبكة المحلية الظاهرية (VLAN) :
YesRIP V1 / V2 :
YesOSPF V2 :
Yesعدد واجهات IP VLAN :
Yesتوجيه السياسة :
YesVRRP :
Yesتجميع الارتباطات :
*دليل LAG :
Yes# من LAGs / # من الأعضاء في كل LAG :
8 LAGs with max 8 members in each LAGخدمات مراقبة واكتشاف الشبكة :
*802.1ab LLDP :
Yesسنمب :
v1, v2c, v3مجموعة RMON 1،2،3،9 :
Yesأمن الشبكات :
Yesالمعيار IEEE 802.1x :
Yesمحاسبة نصف قطرها :
Yesقوائم التحكم في الوصول (ACL) :
Yesقوائم التحكم في الوصول المستندة إلى بروتوكول الإنترنت (IPv4 وIPv6) :
L2 / L3 / L4قوائم التحكم في الوصول المستندة إلى MAC :
Yesقوائم التحكم في الوصول المستندة إلى TCP/UDP :
Yesالتحكم في إدخالات MAC # الثابتة :
48الأمان المستند إلى المنفذ بواسطة عناوين MAC المقفلة :
Yesفحص ARP الديناميكي :
Yesحماية DoS :
Yesمنع هجمات DoS :
Yesحماية من عاصفة الشبكة ، DoS :
Yesجودة الخدمة (QoS) :
*تحديد المعدل المستند إلى المنفذ :
Yes ingress and egressجودة الخدمة القائمة على المنفذ :
Yesدعم حقول IPv6 :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
Yesوجهة MAC و IP :
YesIPv4 و v6 DSCP :
Yesالمستندة إلى TCP/UDP :
Yesجولة روبن المرجحة (WRR) :
Yesتقنية قائمة انتظار الأولوية الصارمة :
Yesبروتوكولات شبكة IEEE :
*البروتوكولات :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXالبروتوكولات 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • ITU-T G.8032 (ERPS)الإدارة والمراقبة واستكشاف الأخطاء وإصلاحها :
*إدارة كلمات المرور :
Yesالتحكم في الوصول عبر RADIUS و TACACS + :
Yesإدارة IPv6 :
YesSNMP v1 / v2c / v3 :
Yesانعكاس المنفذ :
Yes ingress and egressانعكاس متعدد المنافذ إلى واحد :
14أداة اختبار الكابلات :
Yesالوصول المستند إلى الويب TLS/HTTPS (الإصدار) :
Yes (v1.2)نقل الملفات (التحميلات والتنزيلات) :
TFTP / HTTPتحميل / تنزيل HTTP (البرنامج الثابت) :
Yesسجل النظام (RFC 3164) :
Yesالمصابيح :
Yesلكل منفذ :
Speed, Link, Activity; PoE in different modeلكل جهاز :
Powerالمواصفات المادية :
*الأبعاد (العرض * العمق * الارتفاع) :
170 x 148 x 48 mm (6.69 x 5.83 x 1.89 in)ثقل :
1.2 kg (2.65 lb)Installation :
DIN-Rail Mountingحماية شل :
P40 high-strength aluminum caseمتطلبات الطاقة :
AC100~260V 50/60Hz (Dual power input)استهلاك الطاقة :
*أقصى قوة :
19W (worst case, all ports used, line-rate traffic) (Watts)استهلاك الطاقة في وضع الخمول :
12W (all ports link-down standby) (Watts)إيثرنت موفر للطاقة (EEE) :
Yes (deactivated by default)مروحة :
Fanlessالمواصفات البيئية :
*درجة حرارة التشغيل :
-40° to 85°C (-40° to 185°F)رطوبة التشغيل :
95% maximum relative humidity (RH), non-condensingارتفاع التشغيل :
10,000 ft (3,000 m) maximumدرجة حرارة التخزين :
-40° to 85°C (-40° to 185°F)رطوبة التخزين (نسبي) :
95% maximum relative humidity, non-condensingارتفاع التخزين :
10,000 ft (3,000 m) maximumالمعيار التنفيذي والحماية :
*الحماية من الصواعق :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC الجزء 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (مجال مغناطيسي نابض) :
1000A/mIEC61000-4-10 (تذبذب مخمد) :
30A/m, 1MHzIEC61000-4-12 / 18 (موجة الصدمة) :
CM 2.5kV, DM 1kVIEC61000-4-4 (EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (إرسال الوضع المشترك) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (إرسال التردد اللاسلكي) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (زيادة): كابل الطاقة :
CM±4kV/ DM±2kV, Data cable: ±4kVالخواص الميكانيكية :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti Shockالانبعاثات الكهرومغناطيسية والمناعة :
*الشهادات :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013أمان :
*شهادات السلامة :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)الضمان والدعم :
*الضمان المحدود للأجهزة :
Limited Lifetime*الدعم الفني عبر الهاتف والبريد الإلكتروني* :
Limited Lifetime*24x7 الدردشة عبر الإنترنت الدعم الفني :
Limited Lifetime*محتويات العبوة :
*جميع الموديلات :
Smart Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideنوع العمل :
Industrialباندريدث :
1G+10Gالمزيد من الفلاتر :
L3 Managed
Questions & Answers
1. What devices can I connect with this 12 port gigabit Layer 3 managed industrial ethernet swtich?
This switch supports industrial devices such as automation systems, video surveillance cameras, IoT devices, and control networks, providing reliable high-speed connectivity for demanding environments.
2. What is the benefit of having 4 SFP+ uplink ports?
The 4 SFP+ ports allow for high-speed data transmission (up to 10Gb), providing flexible uplink options for scalable network designs, ensuring fast and reliable connectivity in large industrial networks.
3. How does the ERPS feature enhance network reliability?
The ERPS (Ethernet Ring Protection Switching) ensures network redundancy with a sub-50ms failover time, allowing quick recovery from link failures and minimizing downtime in critical industrial applications.
4. What is the operating temperature range of the IES7511-8GE4TF-DC?
The switch operates in extreme temperatures, ranging from -40°C to 85°C, making it suitable for both industrial and outdoor installations where environmental conditions are challenging.
5. Is the IES7511-8GE4TF-DC suitable for outdoor use?
Yes, the switch features an IP40-rated metal enclosure, providing protection against dust and debris, ensuring reliable operation in outdoor and rugged environments.
Related Products
-
IES7211-5FE-DC5 Ports Industrial Switch, 10/100M, DIN-Rail Mount, Redundant Power Input
-
IES7211-8FE-DC8 Ports 10/100M Industrial Switch, DIN-Rail Mount, Redundant Power Input
-
IES7211-8GE2GF-DC8 Ports Gigabit Industrial Ethernet Switch With 2 Gigabit SFP Uplink
-
IES7211-8GE4GF-DC12 Ports Gigabit Industrial Ethernet Switch With 4 Gigabit SFP Uplink