Overview
IES7521-16GE4TF-AC, 16 Port Gigabit Industrial Managed Ethernet Switch with 4-10Gb SFP+ Uplink,Rack Mount,Support ERPS
-
Physical Port
8-10/100/1000BASE-TX Fast Ethernet RJ45 ports with PoE+ (Ports 1 to 8)4-10/100/1000BASE-TX Fast Ethernet RJ45 ports (Port 9 to 12)4-1G/2.5G/10GBASE-X mini-GBIC/SFP+ slot (Ports 13 to 16)1-RJ45 console interface for switch management and setup1-Reset button for system factory default and reboot1-USB interface for switch setupSwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 95Mpps,MAC address 16kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design48~56V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power,PoE Working and LINK/ACTMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti Shock -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authenticationLayer 3 FeaturesSupport Static routingSupport RIPSupport OSPFSupport VRRP -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupport QinQ VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports UDLDSupports Quality of Service (Qos)Supports Static routingSupports Port Error DisableSupports Rate LimitSupports Storm ControlSupports PoE ManagedManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Advanced L2-L3 Managed Features
The IES7521-16GE4TF-AC offers advanced Layer 2 and Layer 3 management capabilities, providing full control over the network. Layer 2 features such as VLAN support allow for efficient network segmentation, improving performance and security. The Layer 3 functionality includes static routing, enabling effective traffic distribution and seamless communication across subnets. With these features, the switch delivers high flexibility and performance, making it ideal for complex, large-scale industrial networks that require precise control and efficient data flow management.
High-Speed 10Gb SFP+ Uplink Ports
Equipped with 4 SFP+ uplink ports that support 10Gb speeds, the IES7521-16GE4TF-AC delivers high bandwidth for data-intensive applications. This capability allows users to handle large volumes of data, enabling smooth transmission for critical industrial applications such as real-time video surveillance, automation control, and data processing. The 10Gb uplink ensures low latency, high throughput, and network scalability, making the switch an excellent choice for expanding industrial networks that require fast, reliable connectivity and high-performance uplink solutions.
ERPS Ring Network for Redundant Connectivity
The IES7521-16GE4TF-AC supports Ethernet Ring Protection Switching (ERPS), which provides enhanced redundancy and minimizes network downtime. ERPS enables rapid recovery times of less than 50ms, ensuring that if one link fails, the network quickly restores connectivity. This feature is critical for industrial applications where continuous uptime is crucial. By automatically rerouting traffic around failed connections, ERPS ensures network reliability and resilience, making it an essential feature for environments requiring fault tolerance and uninterrupted service.
Industrial-Grade Build for Harsh Environments
Designed for demanding environments, the IES7521-16GE4TF-AC features a robust, IP40-rated metal enclosure that offers dust protection. This rugged design allows the switch to operate reliably in environments subject to dust, moisture, and physical impact, such as factories, manufacturing plants, or outdoor locations. With an extended operating temperature range of -40°C to 85°C, the switch ensures stable performance in extreme conditions. This makes the IES7521-16GE4TF-AC ideal for industries where standard commercial switches may fail, ensuring durability in challenging settings.
8KV ESD Protection for Stability
The IES7521-16GE4TF-AC comes with 8KV Electrostatic Discharge (ESD) protection, which helps shield the device from electrical surges and static discharge. In industrial environments where electrical noise and ESD are common, this protection ensures that the switch operates without interruption. ESD protection is vital in preventing hardware damage and maintaining network stability, safeguarding sensitive components and reducing maintenance costs. This feature enhances the switch’s reliability and longevity, particularly in locations where electrostatic discharges could otherwise cause system failures or data loss.
Rack-Mountable Design for Easy Deployment
The IES7521-16GE4TF-AC is designed to be easily mounted in a standard 19-inch rack, facilitating convenient installation in industrial network cabinets, control rooms, or server rooms. This rack-mountable form factor maximizes space utilization and ensures the switch is securely installed, even in environments with vibrations or limited space. The rack mount design is ideal for organizations seeking a neat, professional setup, allowing for efficient organization of network equipment while ensuring easy access for maintenance and upgrades in complex, high-density industrial environments.
Dual AC Power Inputs for Power Redundancy
This industrial Ethernet switch supports dual AC power inputs with an input range of 100~260V, ensuring greater operational reliability. Dual power inputs provide redundancy, reducing the risk of downtime caused by power failures. If one power source becomes unavailable, the other automatically takes over, ensuring the switch remains operational without interruption. This power redundancy is crucial for industrial networks where continuous uptime is vital, making the IES7521-16GE4TF-AC an ideal solution for mission-critical applications where power stability is paramount.
Connectivity Solutions
Layer 3 Managed 16 Port Gigabit Industrial Switch with 4-10G SFP+ Uplink Connection Solution
Layer 3 Managed 16 Port Gigabit Industrial Switch with 4-10G SFP+ Uplink Ring Network Connection Solution
Specification
المواصفات الفنية :
IE7521-16GE4TF-AC10M / 100M / 1G RJ45 المنافذ النحاسية :
16منافذ 1G / 2.5G / 10G SFP + (ألياف) :
4منفذ وحدة التحكم (للتكوين) :
Yesمنفذ يو اس بي :
Yes (for firmware and config upload/ download)مواصفات الأداء :
*ذاكرة التخزين المؤقت للحزم :
12 Mbأوضاع إعادة التوجيه :
Store-and-forwardعرض النطاق الترددي :
128 Gbpsمعدل إعادة توجيه الحزمة :
65..48Mpps (64 byte packet size)حجم قاعدة بيانات عنوان MAC :
16K (48-bit MAC ad-dresses)دعم الإطار الجامبو :
12Kخدمات L2 - شبكات VLAN :
*وضع علامات على الشبكة المحلية الظاهرية (VLAN) وفقا لمعيار IEEE 802.1Q :
Yesوضع علامات QinQ VLAN :
Yesشبكات VLAN القائمة على بروتوكول الإنترنت :
Yesشبكات VLAN المستندة إلى MAC :
Yesشبكة محلية ظاهرية (VLAN) قائمة على البروتوكول :
Yesشبكة محلية ظاهرية صوتية :
Yesتعيين الشبكة المحلية الظاهرية (VLAN) :
Yesخدمات L2 - التوافر :
*السيطرة على العاصفة :
Yes (Broadcast, multicast, unknown unicast)المعيار IEEE 802.3ad - لوائح التأخر (LACP) :
Yesالمعيار IEEE 802.3x :
Yesحلقة (ERPS ، يتوافق مع G.8032) :
Yes, Recovery time < 50msIEEE 802.1D بروتوكول شجرة الامتداد :
YesIEEE 802.1w بروتوكول شجرة الامتداد السريع :
YesIEEE 802.1s بروتوكول شجرة الامتداد المتعددة :
Yesالطبقة 2 مرحل DHCP :
Yesخدمات L2 - تصفية البث المتعدد :
Yesتطفل IGMP (الإصدارات 1 والإصدار 2 والإصدار 3) :
Yesدعم التطفل MLD (v1 و v2) :
YesIGMP التطفل الاستعلام (v2) :
YesMLD التطفل الاستعلام (v1) :
Yesتسجيل شبكة محلية ظاهرية متعددة البث (MVR) :
Yesخدمات L3 - DHCP :
*عميل DHCP :
Yesتطفل DHCP :
Yesخادم DHCP :
Yesخدمات L3 - التوجيه :
*توجيه IPv4 الثابت :
100توجيه IPv6 الثابت :
100توجيه الشبكة المحلية الظاهرية (VLAN) :
YesRIP V1 / V2 :
YesOSPF V2 :
Yesعدد واجهات IP VLAN :
Yesتوجيه السياسة :
YesVRRP :
Yesتجميع الارتباطات :
*دليل LAG :
Yes# من LAGs / # من الأعضاء في كل LAG :
8 LAGs with max 8 members in each LAGخدمات مراقبة واكتشاف الشبكة :
*802.1ab LLDP :
Yesسنمب :
v1, v2c, v3مجموعة RMON 1،2،3،9 :
Yesأمن الشبكات :
Yesالمعيار IEEE 802.1x :
Yesمحاسبة نصف قطرها :
Yesقوائم التحكم في الوصول (ACL) :
Yesقوائم التحكم في الوصول المستندة إلى بروتوكول الإنترنت (IPv4 وIPv6) :
L2 / L3 / L4قوائم التحكم في الوصول المستندة إلى MAC :
Yesقوائم التحكم في الوصول المستندة إلى TCP/UDP :
Yesالتحكم في إدخالات MAC # الثابتة :
48الأمان المستند إلى المنفذ بواسطة عناوين MAC المقفلة :
Yesفحص ARP الديناميكي :
Yesحماية DoS :
Yesمنع هجمات DoS :
Yesحماية من عاصفة الشبكة ، DoS :
Yesجودة الخدمة (QoS) :
*تحديد المعدل المستند إلى المنفذ :
Yes ingress and egressجودة الخدمة القائمة على المنفذ :
Yesدعم حقول IPv6 :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
Yesوجهة MAC و IP :
YesIPv4 و v6 DSCP :
Yesالمستندة إلى TCP/UDP :
Yesجولة روبن المرجحة (WRR) :
Yesتقنية قائمة انتظار الأولوية الصارمة :
Yesبروتوكولات شبكة IEEE :
*البروتوكولات :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3bz 2.5GBASE-T• IEEE 802.3ae 10GBASE-T • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXالبروتوكولات 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • ITU-T G.8032 (ERPS)الإدارة والمراقبة واستكشاف الأخطاء وإصلاحها :
*إدارة كلمات المرور :
Yesالتحكم في الوصول عبر RADIUS و TACACS + :
Yesإدارة IPv6 :
YesSNMP v1 / v2c / v3 :
Yesانعكاس المنفذ :
Yes ingress and egressانعكاس متعدد المنافذ إلى واحد :
20أداة اختبار الكابلات :
Yesالوصول المستند إلى الويب TLS/HTTPS (الإصدار) :
Yes (v1.2)نقل الملفات (التحميلات والتنزيلات) :
TFTP / HTTPتحميل / تنزيل HTTP (البرنامج الثابت) :
Yesسجل النظام (RFC 3164) :
Yesالمصابيح :
Yesلكل منفذ :
Speed, Link, Activity; PoE in different modeلكل جهاز :
Powerالمواصفات المادية :
*الأبعاد (العرض * العمق * الارتفاع) :
440 x 290 x 48 mm (17.32 x 11.42 x 1.89 in)ثقل :
4.8 kg (10.58 lb)متطلبات الطاقة :
AC100~260V 50/60Hz (Dual power input)أقصى قوة :
24W (worst case, all ports used, line-rate traffic) (Watts)استهلاك الطاقة في وضع الخمول :
18W (all ports link-down standby) (Watts)إيثرنت موفر للطاقة (EEE) :
Yes (deactivated by default)مروحة :
Fanlessالمواصفات البيئية :
*درجة حرارة التشغيل :
-40° to 85°C (-40° to 185°F)رطوبة التشغيل :
95% maximum relative humidity (RH), non-condensingارتفاع التشغيل :
10,000 ft (3,000 m) maximumدرجة حرارة التخزين :
-40° to 85°C (-40° to 185°F)رطوبة التخزين (نسبي) :
95% maximum relative humidity, non-condensingارتفاع التخزين :
10,000 ft (3,000 m) maximumالمعيار التنفيذي والحماية :
*الحماية من الصواعق :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC الجزء 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (مجال مغناطيسي نابض) :
1000A/mIEC61000-4-10 (تذبذب مخمد) :
30A/m, 1MHzIEC61000-4-12 / 18 (موجة الصدمة) :
CM 2.5kV, DM 1kVIEC61000-4-4 (EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (إرسال الوضع المشترك) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (إرسال التردد اللاسلكي) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (زيادة): كابل الطاقة :
CM±4kV/ DM±2kV, Data cable: ±4kVالخواص الميكانيكية :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti Shockالانبعاثات الكهرومغناطيسية والمناعة :
*الشهادات :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013أمان :
*شهادات السلامة :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)الضمان والدعم :
*الضمان المحدود للأجهزة :
Limited Lifetime*الدعم الفني عبر الهاتف والبريد الإلكتروني* :
Limited Lifetime*24x7 الدردشة عبر الإنترنت الدعم الفني :
Limited Lifetime*محتويات العبوة :
*جميع الموديلات :
Smart Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideنوع العمل :
Industrialباندريدث :
1G+10Gالمزيد من الفلاتر :
L3 Managed
Questions & Answers
1. What benefits do the 4 SFP+ uplink ports offer?
The 4 SFP+ uplink ports provide 10Gb high-speed connectivity, ensuring fast data transfer and enabling efficient communication across large-scale industrial networks. These ports are ideal for data-intensive applications like automation and video surveillance.
2. How does ERPS Ring protection improve network reliability?
ERPS Ring protection provides rapid network recovery within 50ms in the event of a link failure, ensuring minimal downtime and maintaining continuous data flow in mission-critical industrial applications.
3. What is the operating temperature range for this 16-port gigabit industrial managed ethernet switch?
The IES7521-16GE4TF-AC operates in extreme temperatures, from -40°C to 85°C, making it suitable for harsh industrial environments like factories, warehouses, and outdoor deployments.
4. How does this 16-port gigabit industrial managed ethernet switch protect against electrical surges?
This switch is equipped with 8KV ESD protection, safeguarding it from electrical surges and static discharge, ensuring stable and secure operation even in environments with high electrical interference.
5. Does this 16-port gigabit industrial managed ethernet switch provide power redundancy?
Yes, the IES7521-16GE4TF-AC supports dual AC power inputs (100~260V), ensuring power redundancy to maintain uninterrupted network operation, even if one power source fails. This feature is essential for minimizing downtime in critical operations.
Related Products
-
IES7211-8GE2GF-DC8 Ports Gigabit Industrial Ethernet Switch With 2 Gigabit SFP Uplink
-
IES7211-8GE4GF-DC12 Ports Gigabit Industrial Ethernet Switch With 4 Gigabit SFP Uplink
-
IES7221-16GE4GC-DC16 Port Gigabit Industrial Ethernet Switch With 4 Gigabit RJ45/SFP Uplink
-
IES7221-24GE4GC-DC24 Port Gigabit Industrial Ethernet Switch With 4 Gigabit RJ45/SFP Uplink