Overview
IES7521-24GE4GC-AC, 24 Port Gigabit Industrial Managed Ethernet Switch With 4 Gigabit RJ45/SFP Uplink,Rack Mount
-
Physical Port
24 gigabit ethernet RJ45 ports for high-speed connectivity.2 mini-GBIC/SFP slots for flexible fiber connections.4-10/100/1000Mbps Gigabit Ethernet port4-1.25Gbps mini-GBIC SFP interface combo1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 35.72Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseRack mount design100~260V AC, redundant powerSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Advanced L2-L3 Managed Capabilities
The IES7521-24GE4GC-AC provides comprehensive Layer 2 and Layer 3 management, allowing users to effectively control and optimize their network. Layer 2 features include VLAN support for network segmentation, Link Aggregation (LAG) for increased bandwidth, and QoS (Quality of Service) for prioritizing critical traffic. Layer 3 features, including static routing, enable efficient forwarding between subnets. This flexibility in network management ensures seamless integration and scaling in complex industrial environments, enhancing both network performance and security.
High-Speed Gigabit Ethernet Ports
Equipped with 24 Gigabit Ethernet ports and 4 additional Gigabit RJ45/SFP uplink ports, the IES7521-24GE4GC-AC delivers exceptional performance and scalability. The 24 ports support high-bandwidth applications such as video surveillance, industrial automation, and real-time data processing. The inclusion of 4 uplink ports provides flexibility, enabling both copper and fiber optic connectivity to expand network reach. This switch ensures efficient data transfer with minimal latency, ideal for demanding industrial environments requiring fast and reliable data exchange.
ERPS Ring Network for Redundancy and Fast Recovery
The IES7521-24GE4GC-AC supports Ethernet Ring Protection Switching (ERPS), offering network redundancy and fast failover. ERPS allows for sub-50ms recovery time, minimizing network downtime and ensuring continuous connectivity in case of network failures. This feature is critical for applications where high availability is required, such as industrial automation, transportation, and security monitoring. ERPS improves overall network resilience, ensuring that operations remain uninterrupted, even in the event of hardware failures or other network issues.
Rugged Design for Harsh Industrial Environments
The IES7521-24GE4GC-AC is built to withstand harsh industrial conditions. It features a durable, IP40-rated metal enclosure that protects the switch from dust and other environmental contaminants. With an extended operating temperature range of -40℃ to 85℃, this switch is perfect for deployment in extreme environments such as factories, warehouses, or outdoor installations. Its rugged design ensures reliable performance even in challenging conditions, making it an ideal solution for industrial networks that require long-term durability and high uptime.
8KV ESD Protection for Enhanced Stability
This industrial switch includes 8KV electrostatic discharge (ESD) protection, ensuring the device remains stable and operational in environments prone to electrical surges. ESD protection safeguards the internal components from static buildup and electrical noise, which is common in industrial settings. This feature reduces the risk of network downtime or hardware damage caused by ESD, contributing to the overall stability and longevity of the switch. It’s particularly valuable in environments where electrical interference is frequent, such as manufacturing plants and power stations.
Rack-Mountable Design for Easy Installation
The IES7521-24GE4GC-AC is designed for easy installation in standard 19-inch racks. Its rack-mountable form factor allows for efficient use of space and simplifies the setup process in network closets, control rooms, or industrial cabinets. The sturdy mounting design ensures that the switch remains securely in place, even in vibration-prone environments. This makes it an ideal choice for environments where floor space is limited and where a professional, organized installation is required to maintain a clean and structured network setup.
Dual AC Power Inputs for High Reliability
The IES7521-24GE4GC-AC features dual AC power inputs with an input range of 100~260V, providing enhanced power redundancy. This ensures that the switch remains operational even if one power source fails, reducing the risk of downtime and system disruptions. Dual power inputs are particularly important for critical industrial applications where continuous network uptime is essential. By offering power redundancy, the switch helps users maintain high availability, making it a reliable choice for mission-critical network systems that cannot afford power interruptions.
Connectivity Solutions
Layer 2 Managed 24 Port Industrial Switch 4 Gigabit SFP Uplink Connectivity Solution
Layer 2 Managed 24 Port Industrial Switch 4 Gigabit SFP Uplink Ring Network Connectivity Solution
Specification
المواصفات الفنية :
IE7521-24GE4GC-DC10M / 100M / 1G RJ45 المنافذ النحاسية :
24جيجابت R4J5 و SFP كومبو :
4منفذ وحدة التحكم (للتكوين) :
Yesالزر "إعادة ضبط" :
Yesمواصفات الأداء :
*ذاكرة التخزين المؤقت للحزم :
8.1 Mbأوضاع إعادة التوجيه :
Store-and-forwardعرض النطاق الترددي :
128 Gbpsمعدل إعادة توجيه الحزمة :
47.62Mpps (64 byte packet size)حجم قاعدة بيانات عنوان MAC :
8K (48-bit MAC ad-dresses)دعم الإطار الجامبو :
9Kخدمات L2 - شبكات VLAN :
*وضع علامات على الشبكة المحلية الظاهرية (VLAN) وفقا لمعيار IEEE 802.1Q :
Yesوضع علامات QinQ VLAN :
Yesشبكات VLAN القائمة على بروتوكول الإنترنت :
Yesشبكات VLAN المستندة إلى MAC :
Yesشبكة محلية ظاهرية (VLAN) قائمة على البروتوكول :
Yesشبكة محلية ظاهرية صوتية :
Yesتعيين الشبكة المحلية الظاهرية (VLAN) :
Yesخدمات L2 - التوافر :
*السيطرة على العاصفة :
Yes (Broadcast, multicast, unknown unicast)المعيار IEEE 802.3ad - لوائح التأخر (LACP) :
Yesالمعيار IEEE 802.3x :
Yesحلقة (ERPS ، يتوافق مع G.8032) :
Yes, Recovery time < 50msIEEE 802.1D بروتوكول شجرة الامتداد :
YesIEEE 802.1w بروتوكول شجرة الامتداد السريع :
YesIEEE 802.1s بروتوكول شجرة الامتداد المتعددة :
Yesالطبقة 2 مرحل DHCP :
Yesخدمات L2 - تصفية البث المتعدد :
Yesتطفل IGMP (الإصدارات 1 والإصدار 2 والإصدار 3) :
Yesدعم التطفل MLD (v1 و v2) :
YesIGMP التطفل الاستعلام (v2) :
YesMLD التطفل الاستعلام (v1) :
Yesتسجيل شبكة محلية ظاهرية متعددة البث (MVR) :
Yesخدمات L3 - التوجيه :
*توجيه IPv4 الثابت :
100توجيه IPv6 الثابت :
100تجميع الارتباطات :
*دليل LAG :
Yes# من LAGs / # من الأعضاء في كل LAG :
8 LAGs with max 8 members in each LAGخدمات مراقبة واكتشاف الشبكة :
*802.1ab LLDP :
Yesسنمب :
v1, v2c, v3مجموعة RMON 1،2،3،9 :
Yesأمن الشبكات :
Yesالمعيار IEEE 802.1x :
Yesمحاسبة نصف قطرها :
Yesقوائم التحكم في الوصول (ACL) :
Yesقوائم التحكم في الوصول المستندة إلى بروتوكول الإنترنت (IPv4 وIPv6) :
L2 / L3 / L4قوائم التحكم في الوصول المستندة إلى MAC :
Yesقوائم التحكم في الوصول المستندة إلى TCP/UDP :
Yesالتحكم في إدخالات MAC # الثابتة :
48الأمان المستند إلى المنفذ بواسطة عناوين MAC المقفلة :
Yesفحص ARP الديناميكي :
Yesحماية DoS :
Yesمنع هجمات DoS :
Yesحماية من عاصفة الشبكة ، DoS :
Yesجودة الخدمة (QoS) :
*تحديد المعدل المستند إلى المنفذ :
Yes ingress and egressجودة الخدمة القائمة على المنفذ :
Yesدعم حقول IPv6 :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
Yesوجهة MAC و IP :
YesIPv4 و v6 DSCP :
Yesالمستندة إلى TCP/UDP :
Yesجولة روبن المرجحة (WRR) :
Yesتقنية قائمة انتظار الأولوية الصارمة :
Yesبروتوكولات شبكة IEEE :
*البروتوكولات :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXالبروتوكولات 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • IEEE 802.1w (RSTP) • ITU-TG.8032 (ERPS)الإدارة والمراقبة واستكشاف الأخطاء وإصلاحها :
*إدارة كلمات المرور :
Yesالتحكم في الوصول عبر RADIUS و TACACS + :
Yesإدارة IPv6 :
YesSNMP v1 / v2c / v3 :
Yesانعكاس المنفذ :
Yes ingress and egressانعكاس متعدد المنافذ إلى واحد :
28أداة اختبار الكابلات :
Yesالوصول المستند إلى الويب TLS/HTTPS (الإصدار) :
Yes (v1.2)نقل الملفات (التحميلات والتنزيلات) :
TFTP / HTTPتحميل / تنزيل HTTP (البرنامج الثابت) :
Yesسجل النظام (RFC 3164) :
Yesالمصابيح :
Yesلكل منفذ :
Speed, Link, Activity;لكل جهاز :
Powerالمواصفات المادية :
*الأبعاد (العرض * العمق * الارتفاع) :
440 x 290 x 46 mm (17.32 x 11.32 x 1.81 in)ثقل :
<5.6 kg (12.35 lb)Installation :
Rack Mountingحماية شل :
P40 high-strength aluminum caseمتطلبات الطاقة :
AC 100~260V 50/60Hz redundant powerاستهلاك الطاقة :
*أقصى قوة :
18W (worst case, all ports used, line-rate traffic) (Watts)استهلاك الطاقة في وضع الخمول :
12W (all ports link-down standby) (Watts)إيثرنت موفر للطاقة (EEE) :
Yes (deactivated by default)مروحة :
Fanlessالمواصفات البيئية :
*درجة حرارة التشغيل :
-40° to 85°C (-40° to 185°F)رطوبة التشغيل :
95% maximum relative humidity (RH), non-condensingارتفاع التشغيل :
10,000 ft (3,000 m) maximumدرجة حرارة التخزين :
-40° to 85°C (-40° to 185°F)رطوبة التخزين (نسبي) :
95% maximum relative humidity, non-condensingارتفاع التخزين :
10,000 ft (3,000 m) maximumالمعيار التنفيذي والحماية :
*الحماية من الصواعق :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC الجزء 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (مجال مغناطيسي نابض) :
1000A/mIEC61000-4-10 (تذبذب مخمد) :
30A/m, 1MHzIEC61000-4-12 / 18 (موجة الصدمة) :
CM 2.5kV, DM 1kVIEC61000-4-4 (EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16 (إرسال الوضع المشترك) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (إرسال التردد اللاسلكي) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (زيادة): كابل الطاقة :
CM±4kV/ DM±2kV, Data cable: ±4kVالخواص الميكانيكية :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti Shockالانبعاثات الكهرومغناطيسية والمناعة :
*الشهادات :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013أمان :
*شهادات السلامة :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)الضمان والدعم :
*الضمان المحدود للأجهزة :
Limited Lifetime*الدعم الفني عبر الهاتف والبريد الإلكتروني* :
Limited Lifetime*24x7 الدردشة عبر الإنترنت الدعم الفني :
Limited Lifetime*محتويات العبوة :
*جميع الموديلات :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideنوع العمل :
Industrialباندريدث :
1Gالمزيد من الفلاتر :
L2+ Managed
Related Products
-
IES7521-16GE4GC-AC16 Port Gigabit Industrial Managed Ethernet Switch With 4 Gigabit RJ45/SFP Uplink
-
IES7221-16GE4GC-DC16 Port Gigabit Industrial Ethernet Switch With 4 Gigabit RJ45/SFP Uplink
-
IES7211-5GE1GF-DC5 Ports Gigabit Industrial Ethernet Switch With 1 Gigabit SFP Uplink
-
IES7211-4GE2GF-DC4 Ports Gigabit Industrial Ethernet Switch With 2 Gigabit SFP Uplink